Custom CNC Stainless Steel Clevis Fork Rod-End Connectors (M2/M3) for UAV Servo Pushrod Linkages
Custom CNC-machined stainless steel clevis fork rod-end connectors and M2/M3 pushrod couplers that link UAV servo horns, control arms and push-pull rods. Tight fork-gap and pin-bore fit, retained clevis pin, 5–10 day prototypes.
What Is This Service
We CNC machine stainless steel clevis fork rod-end connectors — the yoke end fittings that screw onto a pushrod and pivot onto a servo horn, control arm or clevis tongue on UAVs, RC aircraft, helicopters and actuator rods. Each coupler combines a threaded barrel that accepts the M2/M3 pushrod, a machined fork (yoke) with a through pin bore, and a retained clevis pin, all turned, milled or wire-cut to your STEP file and PDF drawing.
Why the end fitting decides linkage reliability
A clevis connector is the pivot point between rod and arm. A fork gap that is too wide lets the horn rattle inside the yoke and introduce play; a pin bore that is oversize wears oval and loosens over repeated pivots; weak thread engagement in the barrel can strip or pull out under push-pull load; and a pin that drops out mid-flight severs the control link. Fork gap, pin-bore clearance and thread engagement must all be matched to the mating arm thickness and rod diameter so the joint pivots freely without slop.
What we machine
• Clevis / yoke fork connectors with retained clevis pin and threaded barrel
• M2 and M3 pushrod couplers with internal thread for male pushrods
• Servo-horn links and control-arm rod-end fittings
• Single-hole and twin-fork yoke ends with custom pin bore
• Closed and open-barrel clevis bodies in two or more lengths
• Custom thread sizes, pin diameters and fork gaps on request
Fork, pin and barrel process
We turn the barrel to diameter and cut the internal thread, mill or wire-cut the fork cheeks, drill the cross pin bore, and fit the clevis pin with an R-clip, E-clip, rivet or press fit per your design. Fork gap is held to match your arm or tongue thickness; pin bore clearance is set for a free pivot without side slop. Typical achievable tolerance is ±0.02 mm on fork gap and pin bore diameter, with full dimensional inspection on request.
Material and strength selection
304 stainless is our standard for general UAV linkages — good corrosion resistance and easy machining. 316L is specified for coastal or humid environments, and 17-4PH for higher-strength, load-bearing joints where push-pull loads are high. Weight-critical positions can use 6061/7075 aluminum or TC4 titanium. Parts can be supplied polished, passivated or as-machined.
Materials we run
304 and 316L stainless steel, 17-4PH stainless, 6061-T6 / 7075-T6 aluminum, TC4 / Ti-6Al-4V titanium — chosen against your load, weight, corrosion and thread-engagement targets.
Inspection and delivery
Every batch is checked against the drawing: fork gap width, pin bore diameter and clearance, thread size and fit (go/no-go gauge), overall length, barrel thread engagement, pin retention, concentricity and surface finish. Thread go/no-go reports, CMM reports and material mill certificates (EN 10204 3.1) are available. Prototype and small-batch clevis connectors ship in 5–10 days.
Send us your STEP/STP file and PDF drawing — include thread size, mating arm thickness, fork gap, pin bore and pin diameter, overall length and required material, and we flag fit-up clearances and pin-retention method before machining starts.
Materials We Machine
From aerospace-grade aluminum to medical-certified engineering plastics, our in-house CNC machining centers work a broad range of metals and plastics under one roof.
Metals
Aluminum
Stainless Steel
Carbon & Alloy Steel
Brass & Copper
Titanium & Exotics
Engineering Plastics
POM (Delrin)
Nylon (PA66)
PTFE (Teflon)
PEEK / PEI (Ultem)
ABS / PC / PMMA
Don’t see your material? Send your drawing for review — we will confirm availability and quote it.
Surface Finish Options
Functional and cosmetic finishes applied in-house or through vetted partners.

Clear Anodize
Type II protective anodize, natural silver finish.

Black Hard Anodize
Type III hard coat, wear-resistant black.

Color Anodize
Blue, red, gold, green dye for audio and 3C.

Bead Blast
Uniform matte texture, hides machining marks.

Powder Coating
Durable corrosion-resistant RAL colors.

Passivation
Removes free iron, boosts stainless corrosion.

Plating
Zinc, nickel, chrome, tin for connectors.

Laser Marking
Permanent non-contact logos and serials.
From Drawing to Delivery
Quality You Can Verify


More Products in This Category
Custom CNC aluminum servo control horns for RC fixed-wing aircraft and UAVs - blue anodized L/R pairs, +/-0.01mm pivot, quick-release pin, 1-3 day prototypes.
View Product →
One-piece 6061-T6 tri-arm hubs, 5-axis machined with ±0.02 mm bore-to-bolt position, deburred and finished. 3–5 day prototypes from a STEP file.
View Product →Inside Our Factory — 200+ Machines Under One Roof
Vertical Machining Centers
High-efficiency VMCs for prototype, mid-volume and large-batch metal parts production.
Drill & Tap Machining Centers
Integrated drilling, tapping and milling shortens lead time for aluminum enclosures.
Multi-Function Machining Shop
Combined drilling-milling lines support both small batches and volume OEM orders.
CNC Production Workshop
Well-organized production zones support everything from one-off parts to mass programs.
Standard CNC Lines
Systematic line layout raises machining efficiency and guarantees on-time delivery.
5-Axis Machining Equipment
Complete CNC equipment set enables stable continuous running for OEM volumes.
Dongguan, China · 200+ CNC machines · In-house anodizing & laser cutting · Visitors and third-party inspections welcome.
Quality, Engineering & Logistics — Built for Global Buyers

IATF 16949 & ISO 9001 Certified
Fully certified quality management system. Every batch ships with material certificates and inspection reports you can trust.

Free DFM Engineering Support
Our engineers review every drawing upfront — flagging tolerances, undercuts and cost drivers before a single chip is cut.

Secure Packaging & Global Shipping
Custom foam, wooden crates and FBA-ready packaging. Door-to-door freight to 60+ countries with full tracking.
SIMPLE PROCESS
What Happens After You Click Send?
Your message lands directly with our senior engineers — instantly acknowledged.
We study your requirements and propose a workable solution with material & process options.
Detailed quotation with specs, options and lead time — no hidden fees.
Approve the sample, then we mass-produce with full QC and on-time shipping.
WhatsApp: +86 13790500374
Email: info@rejincnc.com

Scan this QR code with your WeChat app to add us as a contact — send drawings, get quotes within 24 hours and chat with our engineers directly.
Custom Quote Within 24 Hours
Your CAD files are kept strictly confidential. Quotation within 24 hours.
