CNC Milling
Our 3-axis and 3+2-axis CNC milling machines produce complex prismatic parts — housings, brackets, heat sinks, fixturing and optical/aluminum panels — from aluminum, steel, stainless and engineering plastics. We hold ±0.005 mm on pocket depth and position, and run both prototype batches and production runs up to 50,000 pcs.

What We Mill Most
- Audio interface panels & faceplates — 6063 anodized aluminum, sharp corners, silk-screened or laser-etched legends.
- Electronics housings & enclosures — EMI shielding pockets, connector cutouts, heat-sink fins.
- Heat sinks & thermal parts — thin fins down to 0.5 mm pitch, vacuum-brazed or bolted assemblies.
- Fixturing & jigs — production tooling, inspection gauges, low-volume production parts.
CNC Milling Capabilities
| Parameter | Capability |
|---|---|
| Work envelope | up to 1000 × 500 × 300 mm |
| Position tolerance | ±0.005 mm (3-axis), ±0.005 mm typical |
| Min wall thickness | 0.5 mm (aluminum), 1.0 mm (steel) |
| Min hole diameter | Ø0.5 mm (drilled), EDM for smaller |
| Spindle speed | up to 15,000 rpm |
| Materials | Aluminum 6061/6063/7075, steel 1045/4140, stainless 304/316, brass, copper, POM, PEEK, acrylic |
Industries We Serve
Audio & electroacoustic, 3C electronics, automotive, LED thermal management, optical and test equipment.
What We Machine With This Process
Real components shipped to overseas buyers — not generic stock photos.
Aluminum Panels & Faceplates
6061-T6 milled, anodized. Audio faceplates, mixer panels, control surfaces.
Heat Sinks & Thermal Plates
Extruded 6063, fly-cut bases, taped holes. Custom fin density.
Enclosures & Housings
Pocketed, threaded and sealed. Aluminum electronic enclosures and chassis.
Speaker & Device Housings
Internal pockets, port tubes, driver mounts. CNC-ported speaker cabinets.
3C Electronics Brackets
Phone, camera and wearables. Precision brackets, frames and shield cans.
Manifolds & Fluid Blocks
Cross-drilled and ported. Hydraulic manifolds, cooling plates, valve bodies.
Why Buyers Choose Rejin CNC for This Process
Six reasons engineering teams send us drawings instead of another quote request.
Micron-Level Tolerance
Hold ±0.005 mm on critical features with in-process probing and CMM first-article reports on every batch.
Quote & DFM in 24 Hours
A senior engineer reviews your drawing — not a sales rep. We flag tolerance, undercut and cost drivers before quoting.
Fast Prototype Delivery
1–10 piece prototypes ship in 3–7 days. Rush 24-hour service available for urgent development cycles.
In-House Capacity
200+ CNC mills, lathes and 5-axis machines under one roof. No subcontracting — we control quality and lead time.
Countries Served
Door-to-door DHL/FedEx or sea freight. Full tracking, customs handled, FBA-ready packaging on request.
Your Drawings Are Safe
Standard NDA before quoting. Files stored on encrypted internal servers, never shared or reused.
Precision Inspection In Every Production Stage

01 CMM 3D Precision Inspection
Verify critical dimensions, hole positions and complex GD&T geometric tolerances via professional CMM equipment. Full 3D scanning avoids assembly defects for complex machined components.

02 In-process Dimensional Verification
Continuous in-process dimensional testing with precision measuring tools. Early defect identification minimizes scrap risk during mass OEM production.

03 Surface Finish & Visual Inspection
Strict inspection on surface finish, scratches, burrs and coating defects. Meet strict appearance requirements of aluminum alloy housings.
04 First Article Inspection (FAI)
Standardized first article inspection before mass production. Deliver formal FAI reports to stabilize dimensional consistency for bulk orders.

05 Raw Material Traceability Management
Complete material certification & batch records. All machined parts can trace back to raw material source for IATF 16949 automotive compliance.

06 Final Functional Performance Checks
Comprehensive final functional inspections to identify hidden defects that dimension testing cannot catch, guarantee stable part performance.

07 Salt Spray Corrosion Test
Neutral salt spray chamber evaluates anti-corrosion performance of anodized, plated and coated CNC parts, verifying long-term outdoor and humid-environment durability to ASTM B117 standards.

08 Aging & Pressure Durability Test
Simulate real-world working conditions — temperature cycling, vibration and repeated load — to verify long-term mechanical reliability and prevent premature field failure of precision machined components.
Quality, Engineering & Logistics — Built for Global Buyers
Certified CNC machining partner in China — IATF 16949 & ISO 9001 quality management, free DFM analysis from senior engineers, and export-grade packaging with door-to-door tracking to 60+ countries.

IATF 16949 & ISO 9001 Certified
Fully certified quality management system. Every batch ships with material certificates and inspection reports you can trust.

Free DFM Engineering Support
Our engineers review every drawing upfront — flagging tolerances, undercuts and cost drivers before a single chip is cut.

Secure Packaging & Global Shipping
Custom foam, wooden crates and FBA-ready packaging. Door-to-door freight to 60+ countries with full tracking.
SIMPLE PROCESS
What Happens After You Click Send?
Your message lands directly with our senior engineers — instantly acknowledged.
We study your requirements and propose a workable solution with material & process options.
Detailed quotation with specs, options and lead time — no hidden fees.
Approve the sample, then we mass-produce with full QC and on-time shipping.
WhatsApp: +86 13790500374
Email: info@rejincnc.com

Scan this QR code with your WeChat app to add us as a contact — send drawings, get quotes within 24 hours and chat with our engineers directly.
Custom Quote Within 24 Hours
Your CAD files are kept strictly confidential. Quotation within 24 hours.
