Contact Info

CNC aluminum quick-release propeller mount kit on black quadcopter drone with self-tightening prop nuts and motor bases
Black anodized CNC aluminum quick-release propeller mount base and self-tightening nut with four tapped holes for multirotor UAV
CNC machined black anodized self-tightening quick-release propeller nut with threaded stud and anti-slip gear teeth for drone motor
CNC aluminum quick-release propeller mount adapter set, flanged motor base and quick-release prop nut for RC multirotor
CNC aluminum quick-release propeller mount motor base and self-tightening nut with lightening windows for agricultural drone
CNC aluminum quick-release propeller mount kit on black quadcopter drone with self-tightening prop nuts and motor bases
Black anodized CNC aluminum quick-release propeller mount base and self-tightening nut with four tapped holes for multirotor UAV
CNC machined black anodized self-tightening quick-release propeller nut with threaded stud and anti-slip gear teeth for drone motor
CNC aluminum quick-release propeller mount adapter set, flanged motor base and quick-release prop nut for RC multirotor
CNC aluminum quick-release propeller mount motor base and self-tightening nut with lightening windows for agricultural drone

CNC Aluminum Quick-Release Propeller Mounts for Drones

Custom CNC aluminum quick-release propeller mounts for multirotor drones and UAVs - black anodized 6061-T6 self-tightening crown nut and motor base, four tapped holes, anti-slip drive teeth, +/-0.01 mm thread fit, CW/CCW matched sets, 1-3 day prototypes.
6061-T6aircraft aluminum
+/-0.01mm thread fit
M5-M8shaft threads
1-3day prototypes
  • No-Tool Propeller Swaps: The self-tightening crown nut locks and releases by hand, so crews swap props in seconds between sorties - no wrenches, no over-torqued plastic nuts.
  • Cannot Spin Loose In Flight: Anti-slip drive teeth engage the prop hub and the CW/CCW self-tightening thread pulls tighter under motor torque, eliminating prop nuts that back off in the air.
  • Rigid Black-Anodized Aluminum: CNC machined 6061-T6 with hard anodizing is far stiffer and more wear-resistant than molded plastic, with precision bore and lightening windows for low rotating mass.
  • Made To Your Motor Spec: Motor base bolt pattern, shaft thread (M5, M6, M8 or 1/4-28), prop hub and folding-prop geometry are machined to your drawing; CW/CCW supplied as serialized sets.
Tolerance Type Description
Precision Tolerance Parts are manufactured and inspected strictly according to your drawing specifications and GD&T annotations, with a minimum tolerance of ±0.05 mm.
General Tolerance ±0.05 mm
Minimum Feature Size 0.5 mm. The exact minimum feature size may vary depending on the part geometry and selected material.
Threading & Tapped Holes Capable of machining any standard thread sizes, as well as customized thread specifications.
Edge Condition Sharp edges are deburred and chamfered by default.
Surface Finishing Anodizing, Powder Coating, Spray Painting, Laser Engraving, Silk Screen Printing
Minimum Wall Thickness 0.5mm
Minimum End Mill Size 0.5mm
Minimum Drill Hole Size 1mm
Minimum Part Size CNC Milling: 5 × 5 × 5 mm;
CNC Turning: 2 × 2 mm;
Maximum Part Size CNC Milling: 4000 × 1500 × 600 mm

CNC Turning: 200 × 500 mm

What Is This Product

What Is A Quick-Release Propeller Mount?

A quick-release propeller mount is a two-piece hub that connects a propeller to a multirotor motor. The motor base (prop adapter) bolts to the motor bell and locates the propeller on its center bore; the self-tightening crown nut screws onto the motor shaft and clamps the propeller. Quick-release designs let pilots lock and remove props by hand without tools, while still transmitting full motor torque without slip.

Why Fleet Operators Replace Stock Adapters

Plastic prop nuts strip, crack under UV and heat, and can unwind during vibration-heavy spraying flights; thin stamped adapters wobble and enlarge the prop hub hole, causing vibration and bearing wear. On commercial drones that fly hundreds of hours, a loose prop mount means a lost aircraft. A machined aluminum mount with anti-slip teeth and a self-tightening thread keeps the prop true to the shaft and holds torque for thousands of cycles.

How We Machine Them

The base is CNC turned and milled from 6061-T6 in a single setup: center bore, four tapped motor holes and lightening windows are produced true to the mounting face. The crown nut is turned, threaded and milled with drive teeth and finger-grip windows, then black hard-anodized for wear and corrosion resistance. Threads are chased to +/-0.01 mm and each CW/CCW pair is test-fitted on a mating shaft before shipment.

Precision Prop Mount Machining

No-Tool Quick-Release Crown

The self-tightening crown nut locks and releases by hand with a knurled finger grip, so ground crews swap propellers between sorties without tools - and it cannot be over-tightened by a wrench.

True, Zero-Runout Bore

The motor base center bore is turned to +/-0.01 mm and the four tapped holes are positioned in one fixture, keeping the propeller perfectly concentric to the shaft and eliminating motor vibration.

Torque That Cannot Unwind

Anti-slip drive teeth bite into the prop hub while the CW/CCW self-tightening thread pulls tighter under motor torque, so the prop cannot loosen even during heavy spraying or payload flight.

Materials We Machine

From aerospace-grade aluminum to medical-certified engineering plastics, our in-house CNC machining centers work a broad range of metals and plastics under one roof.

Metals

Aluminum alloy raw stock bar for CNC precision machining
Aluminum
6061-T66063-T57075-T6505220246082
High strengthAnodizableLightweight
Stainless steel raw material for precision CNC machined parts
Stainless Steel
303304316 / 316L17-4PH430
Corrosion resistantFood & medical gradeHigh strength
Carbon alloy steel raw stock for CNC precision machining
Carbon & Alloy Steel
1018104512L144140A36
High strengthHeat treatableWear resistant
Brass copper bar stock for CNC turned precision parts
Brass & Copper
C3604C26000C17200 BeCuC11000
ConductiveCorrosion resistantFree machining
Titanium alloy stock for aerospace grade CNC precision machining
Titanium & Exotics
Grade 2Grade 5 (6Al-4V)Inconel 718Monel 400
Aerospace gradeHeat resistantBiocompatible

Engineering Plastics

Engineering plastics POM, ABS and high performance polymers for CNC machining
POM (Delrin)
Low frictionDimensionally stableWear resistant
Nylon (PA66)
ToughAbrasion resistantImpact resistant
PTFE (Teflon)
Chemical resistantHigh temperatureLow friction
PEEK / PEI (Ultem)
High temperatureMedical gradeHigh performance
ABS / PC / PMMA
Impact resistantTransparent optionsFlame retardant

Don’t see your material? Send your drawing for review — we will confirm availability and quote it.

Surface Finish Options

Functional and cosmetic finishes applied in-house or through vetted partners.

Clear anodized aluminum

Clear Anodize

Type II protective anodize, natural silver finish.

Black hard anodized enclosure

Black Hard Anodize

Type III hard coat, wear-resistant black.

Color anodized aluminum parts

Color Anodize

Blue, red, gold, green dye for audio and 3C.

Bead blasted aluminum surface

Bead Blast

Uniform matte texture, hides machining marks.

Black powder coated enclosure

Powder Coating

Durable corrosion-resistant RAL colors.

Passivated stainless flanges

Passivation

Removes free iron, boosts stainless corrosion.

Nickel plated hardware

Plating

Zinc, nickel, chrome, tin for connectors.

Laser engraved logo

Laser Marking

Permanent non-contact logos and serials.

From Drawing to Delivery

1Drawing Review & DFMFree engineering feedback within 24 hours
2Quote & Material PlanTransparent pricing with lead time commitment
3CNC Programming & SetupCAM-validated toolpaths and fixturing
4Precision MachiningIn-process checks on every operation
5Surface Finish & TreatmentAnodizing, plating, coating in-house
6Final Inspection & ShipFull dimensional report with every batch

Quality You Can Verify

CMM coordinate measuring machine for 3D precision inspection
01CMM 3D Precision MeasurementDedicated CMM lab verifies critical dimensions, hole positions and GD&T callouts per IATF 16949 practice; 3D scanning avoids assembly issues on complex parts.
Height gauge inspection equipment for in-process dimensional verification
02In-Process Dimensional VerificationContinuous on-line checks with precision gauges catch deviations early and minimize scrap risk during volume OEM runs.
Stereo microscope inspection for surface finish and visual quality checks
03Surface Finish & Visual InspectionSurface roughness, scratches, burrs and coating defects are checked against appearance standards before packing.
First article inspection report verification
04First-Article Inspection (FAI)Standardized FAI before every production run, with a formal report to guarantee dimensional consistency across the batch.
Raw material traceability management with mill certificates
05Material TraceabilityComplete material certifications and batch records — every machined part is traceable to its original mill, per IATF 16949.
Final functional performance checks before shipment
06Final Functional ChecksFull final inspection catches hidden defects dimensional tests can miss, so parts perform reliably in your assembly.
CMM VerificationCritical dimensions checked on coordinate measuring machine
In-Process ChecksContinuous on-line inspection during production runs
Surface Finish AuditRoughness, coating and visual standards verified
Full TraceabilityMaterial certs and batch records for every part

Inside Our Factory — 200+ Machines Under One Roof

Vertical machining center workshop — Rejin CNC factory

Vertical Machining Centers

High-efficiency VMCs for prototype, mid-volume and large-batch metal parts production.

Drill-machining center workshop — Rejin CNC factory

Drill & Tap Machining Centers

Integrated drilling, tapping and milling shortens lead time for aluminum enclosures.

Multi-function CNC machining workshop — Rejin CNC factory

Multi-Function Machining Shop

Combined drilling-milling lines support both small batches and volume OEM orders.

CNC production workshop with organized work areas

CNC Production Workshop

Well-organized production zones support everything from one-off parts to mass programs.

Standard CNC turning and milling production line

Standard CNC Lines

Systematic line layout raises machining efficiency and guarantees on-time delivery.

Full set of CNC milling equipment running continuously

5-Axis Machining Equipment

Complete CNC equipment set enables stable continuous running for OEM volumes.

Dongguan, China · 200+ CNC machines · In-house anodizing & laser cutting · Visitors and third-party inspections welcome.

Quality, Engineering & Logistics — Built for Global Buyers

IATF 16949 & ISO 9001 Certified

IATF 16949 & ISO 9001 Certified

Fully certified quality management system. Every batch ships with material certificates and inspection reports you can trust.

Free DFM Engineering Support

Free DFM Engineering Support

Our engineers review every drawing upfront — flagging tolerances, undercuts and cost drivers before a single chip is cut.

Secure Packaging & Global Shipping

Secure Packaging & Global Shipping

Custom foam, wooden crates and FBA-ready packaging. Door-to-door freight to 60+ countries with full tracking.

Frequently Asked Questions

Which motor shaft sizes and threads do you support?
Standard mounts cover M5, M6, M8 and 1/4-28 motor shafts for most 30-100 mm multirotor motors. We also machine custom shafts, bolt circles and prop hub patterns from your drawing or sample - send us the motor model and propeller you use.
Do the nuts really self-tighten so they cannot come loose?
Yes. The crown nut is threaded to match the motor rotation (CW/CCW) and pulls tighter as the propeller drives against it, while anti-slip teeth engage the prop hub. The pair is designed so aerodynamic and motor torque keep it locked in flight.
Are these compatible with folding propellers?
Yes. The motor base and crown geometry can be machined for folding-prop hubs, including the blade root spacing and clamping height. Send your propeller model or STEP file and we confirm the fit during DFM.
What finishes and documentation do you provide?
Black hard-anodized 6061-T6 is standard for wear and corrosion resistance; other anodize colors and laser-marked part numbers are available. First-article inspection, material certificates and dimensional reports are included for production runs.
SIMPLE PROCESS

What Happens After You Click Send?

1
Inquiry Received

Your message lands directly with our senior engineers — instantly acknowledged.

2
Engineer Review

We study your requirements and propose a workable solution with material & process options.

3
Quote Within 24h

Detailed quotation with specs, options and lead time — no hidden fees.

4
Sample & Production

Approve the sample, then we mass-produce with full QC and on-time shipping.

WhatsApp: +86 13790500374

Email: info@rejincnc.com

WeChatRejin CNC WeChat QR code
WeChat ID: +86 18362358467

Scan this QR code with your WeChat app to add us as a contact — send drawings, get quotes within 24 hours and chat with our engineers directly.

Request a Quote

Custom Quote Within 24 Hours

    Upload Drawing / Sketch (Optional)

    No file selected

    Your CAD files are kept strictly confidential. Quotation within 24 hours.

    Send us an Email WhatsApp Instant Chat Get a Free Quote