CNC Brass Fuel Clunk Pickups for RC Aircraft Tanks
- Weighted To Follow The Fuel: The bullet-shaped brass or steel body falls to the lowest fuel point in any attitude, so the engine never draws air during steep climbs, aerobatics or inverted flight.
- Barbed Tail, Zero Tube Blow-Off: The CNC turned multi-barb tail locks into 3.3-5 mm ID fuel tubing; the line cannot slip off under pump pressure or engine vibration.
- Sintered Bronze Filter Option: The sintered bronze filter clunk (D) passes fuel while trapping tank debris and sealant, protecting the carburetor and fuel pump from blockage.
- Complete Tank Hardware: A/B steel clunks, C brass clunk, D filter clunk and 3000 cc translucent tank ship as a matched kit, or custom weights, lengths and barb sizes to your drawing.
| Tolerance Type | Description |
| Precision Tolerance | Parts are manufactured and inspected strictly according to your drawing specifications and GD&T annotations, with a minimum tolerance of ±0.05 mm. |
| General Tolerance | ±0.05 mm |
| Minimum Feature Size | 0.5 mm. The exact minimum feature size may vary depending on the part geometry and selected material. |
| Threading & Tapped Holes | Capable of machining any standard thread sizes, as well as customized thread specifications. |
| Edge Condition | Sharp edges are deburred and chamfered by default. |
| Surface Finishing | Anodizing, Powder Coating, Spray Painting, Laser Engraving, Silk Screen Printing |
| Minimum Wall Thickness | 0.5mm |
| Minimum End Mill Size | 0.5mm |
| Minimum Drill Hole Size | 1mm |
| Minimum Part Size | CNC Milling: 5 × 5 × 5 mm; CNC Turning: 2 × 2 mm; |
| Maximum Part Size | CNC Milling: 4000 × 1500 × 600 mm
CNC Turning: 200 × 500 mm |
What Is This Product
What Is A Fuel Clunk?
A fuel clunk (or fuel pick-up weight) is a small heavy fitting on the end of the flexible fuel pickup line inside an aircraft fuel tank. Its weight keeps the pickup submerged at the lowest point of the fuel as the aircraft changes pitch or rolls, and the flexible line lets it swing freely. It is the last component before the engine in the fuel path, so it also commonly carries a filter.
Why Clunk Design Matters
A clunk that is too light floats and sucks air in aerobatic flight; a clunk with sharp edges or too large a diameter sticks to the tank wall; a pickup without a filter lets tank debris and sealant plug the carburetor. Any of these cause a dead-stick engine cut. A properly weighted, all-angle slotted, filtered clunk with a secure barbed tail guarantees fuel feed in every attitude.
How We Machine Them
Each clunk is CNC turned from solid brass or steel bar: the bullet nose, slotted multi-angle intake and barbed tail are produced in one setup, then the body is polished and deburred. The filter variant is fitted with a sintered bronze element. The 3000 cc tank is translucent blow-molded with the clunk, filter and pickup lines as a complete kit.
Precision Fuel Hardware Machining
Weighted For Every Attitude
The CNC turned brass or steel bullet body keeps the pickup submerged at the lowest fuel point through climbs, rolls and inverted flight, preventing air ingestion and dead-stick cuts.
Barbed Tails That Cannot Slip
Multi-barb hose tails are CNC turned to match 3.3-5 mm ID fuel tubing, gripping the line so it cannot blow off under pump pressure or vibration.
Filtered Clunks & Full Kits
A sintered bronze filter clunk traps tank debris before the engine, and we supply the matching 3000 cc tank and hardware as a complete, matched fuel-system kit.
Materials We Machine
From aerospace-grade aluminum to medical-certified engineering plastics, our in-house CNC machining centers work a broad range of metals and plastics under one roof.
Metals
Aluminum
Stainless Steel
Carbon & Alloy Steel
Brass & Copper
Titanium & Exotics
Engineering Plastics
POM (Delrin)
Nylon (PA66)
PTFE (Teflon)
PEEK / PEI (Ultem)
ABS / PC / PMMA
Don’t see your material? Send your drawing for review — we will confirm availability and quote it.
Surface Finish Options
Functional and cosmetic finishes applied in-house or through vetted partners.

Clear Anodize
Type II protective anodize, natural silver finish.

Black Hard Anodize
Type III hard coat, wear-resistant black.

Color Anodize
Blue, red, gold, green dye for audio and 3C.

Bead Blast
Uniform matte texture, hides machining marks.

Powder Coating
Durable corrosion-resistant RAL colors.

Passivation
Removes free iron, boosts stainless corrosion.

Plating
Zinc, nickel, chrome, tin for connectors.

Laser Marking
Permanent non-contact logos and serials.
From Drawing to Delivery
Quality You Can Verify


More Products in This Category
Custom CNC aluminum servo control horns for RC fixed-wing aircraft and UAVs - blue anodized L/R pairs, +/-0.01mm pivot, quick-release pin, 1-3 day prototypes.
View Product →
Custom CNC aluminum quick-release propeller mounts for multirotor drones and UAVs - black anodized self-tightening nuts, no-tool swaps, 1-3 day prototypes.
View Product →
Custom CNC aluminum propeller spinners for fixed-wing RC aircraft and UAVs - 3-4.5 inch 2-blade cones, true backplates, 1-3 day prototypes.
View Product →
Inside Our Factory — 200+ Machines Under One Roof
Vertical Machining Centers
High-efficiency VMCs for prototype, mid-volume and large-batch metal parts production.
Drill & Tap Machining Centers
Integrated drilling, tapping and milling shortens lead time for aluminum enclosures.
Multi-Function Machining Shop
Combined drilling-milling lines support both small batches and volume OEM orders.
CNC Production Workshop
Well-organized production zones support everything from one-off parts to mass programs.
Standard CNC Lines
Systematic line layout raises machining efficiency and guarantees on-time delivery.
5-Axis Machining Equipment
Complete CNC equipment set enables stable continuous running for OEM volumes.
Dongguan, China · 200+ CNC machines · In-house anodizing & laser cutting · Visitors and third-party inspections welcome.
Quality, Engineering & Logistics — Built for Global Buyers

IATF 16949 & ISO 9001 Certified
Fully certified quality management system. Every batch ships with material certificates and inspection reports you can trust.

Free DFM Engineering Support
Our engineers review every drawing upfront — flagging tolerances, undercuts and cost drivers before a single chip is cut.

Secure Packaging & Global Shipping
Custom foam, wooden crates and FBA-ready packaging. Door-to-door freight to 60+ countries with full tracking.
Frequently Asked Questions
Which clunk should I use for my aircraft?
What fuel tubing size fits the barbed tail?
Can you supply the complete tank and pickup assembly?
Can you make custom weights and lengths?
SIMPLE PROCESS
What Happens After You Click Send?
Your message lands directly with our senior engineers — instantly acknowledged.
We study your requirements and propose a workable solution with material & process options.
Detailed quotation with specs, options and lead time — no hidden fees.
Approve the sample, then we mass-produce with full QC and on-time shipping.
WhatsApp: +86 13790500374
Email: info@rejincnc.com

Scan this QR code with your WeChat app to add us as a contact — send drawings, get quotes within 24 hours and chat with our engineers directly.
Custom Quote Within 24 Hours
Your CAD files are kept strictly confidential. Quotation within 24 hours.
