Contact Info

5-axis CNC machined aluminum robot tool flange and quick-change EOAT mounting plate with bolt circle, locating pin holes and pneumatic passages
5-axis CNC machined aluminum robot tool flange and quick-change EOAT mounting plate with bolt circle, locating pin holes and pneumatic passages

5-Axis CNC Robot Tool Flanges & Quick-Change EOAT Mounting Plates

Custom 5-axis CNC machined aluminum and titanium robot tool flanges, quick-change plates and end-of-arm tooling (EOAT) mounting components for industrial robot arms. Precision bolt circles, locating pin holes, seal grooves and pneumatic passages held to ±0.005 mm, 5–10 day prototypes.

5-axissimultaneous CNC machining
7075/6061Al, TC4 Ti & stainless
5-10 dayprototype lead time

What Is This Service

We custom CNC machine robot tool flanges, quick-change (QC) plates, gripper connectors and end-of-arm tooling adapters for industrial robot arms, collaborative robots and automation cells. Each part is 5-axis machined from solid 7075/6061 aluminum, TC4 titanium or stainless steel to your STEP file and PDF drawing, with precision bolt circles, locating pin holes, seal grooves, pneumatic passages and cable routing held to tight tolerances.

Why end-of-arm tooling accuracy matters
The tool flange is the interface between the robot and the gripper, suction cup, quick-change coupler or force-torque sensor. A misaligned bolt circle or an off-spec locating pin hole shifts the gripper pose, degrades repeatability and causes downtime. Sealing grooves and pneumatic passages must be burr-free and leak-tight for vacuum and gripper circuits.

What we machine
• Robot tool flanges matching standard ISO/robot interfaces
• Quick-change (QC) plate adapters and coupler mounting plates
• Gripper connector brackets and finger mounting blocks
• Suction cup mounting plates and vacuum manifolds
• Force-torque sensor adapters and vision camera brackets
• Pneumatic manifold blocks with cross-drilled air passages

5-axis machining of multi-face flanges
We run 5-axis simultaneous CNC centers. Multi-face flanges, complex pockets, dense bolt circles and cross-drilled pneumatic passages are machined in minimized setups to preserve datum integrity. Typical achievable tolerance is ±0.005 mm on locating pin holes, bolt circles and sealing faces, with full CMM dimensional inspection on request.

Seal grooves, air passages and burr control
Seal groove width and depth must match the O-ring, and air passages must be cross-drilled with deburred intersections to avoid leaks or pressure drop. We control fixturing for thin flanges, protect sealing faces before anodize or passivation, and deburr threaded holes to go/no-go standard.

Materials we run
7075-T6 aluminum (lightweight, high strength, anodizable), 6061-T6 aluminum (general purpose), TC4 / Ti-6Al-4V Grade 5 titanium (high strength-to-weight), 304/316 stainless (rigid, corrosion-resistant), PEEK and POM (insulating, low-friction) — selected against your load, weight, corrosion and cost targets.

Inspection and delivery
Every batch is checked against your drawing: bolt circle positions, locating pin holes, seal groove width/depth, pneumatic passages, mounting face flatness, perpendicularity, thread go/no-go and edge burr. CMM reports, leak test reports and material mill certificates (EN 10204 3.1) are available. Prototype and small-batch EOAT parts ship in 5–10 days.

Send us your STEP/STP file and PDF drawing for a free DFM review and quote — tell us the robot flange model and tool-side interface, and we flag critical fits, seal grooves and air passages before machining starts.

Materials We Machine

From aerospace-grade aluminum to medical-certified engineering plastics, our in-house CNC machining centers work a broad range of metals and plastics under one roof.

Metals

Aluminum alloy raw stock bar for CNC precision machining
Aluminum
6061-T66063-T57075-T6505220246082
High strengthAnodizableLightweight
Stainless steel raw material for precision CNC machined parts
Stainless Steel
303304316 / 316L17-4PH430
Corrosion resistantFood & medical gradeHigh strength
Carbon alloy steel raw stock for CNC precision machining
Carbon & Alloy Steel
1018104512L144140A36
High strengthHeat treatableWear resistant
Brass copper bar stock for CNC turned precision parts
Brass & Copper
C3604C26000C17200 BeCuC11000
ConductiveCorrosion resistantFree machining
Titanium alloy stock for aerospace grade CNC precision machining
Titanium & Exotics
Grade 2Grade 5 (6Al-4V)Inconel 718Monel 400
Aerospace gradeHeat resistantBiocompatible

Engineering Plastics

Engineering plastics POM, ABS and high performance polymers for CNC machining
POM (Delrin)
Low frictionDimensionally stableWear resistant
Nylon (PA66)
ToughAbrasion resistantImpact resistant
PTFE (Teflon)
Chemical resistantHigh temperatureLow friction
PEEK / PEI (Ultem)
High temperatureMedical gradeHigh performance
ABS / PC / PMMA
Impact resistantTransparent optionsFlame retardant

Don’t see your material? Send your drawing for review — we will confirm availability and quote it.

Surface Finish Options

Functional and cosmetic finishes applied in-house or through vetted partners.

Clear anodized aluminum

Clear Anodize

Type II protective anodize, natural silver finish.

Black hard anodized enclosure

Black Hard Anodize

Type III hard coat, wear-resistant black.

Color anodized aluminum parts

Color Anodize

Blue, red, gold, green dye for audio and 3C.

Bead blasted aluminum surface

Bead Blast

Uniform matte texture, hides machining marks.

Black powder coated enclosure

Powder Coating

Durable corrosion-resistant RAL colors.

Passivated stainless flanges

Passivation

Removes free iron, boosts stainless corrosion.

Nickel plated hardware

Plating

Zinc, nickel, chrome, tin for connectors.

Laser engraved logo

Laser Marking

Permanent non-contact logos and serials.

From Drawing to Delivery

1Drawing Review & DFMFree engineering feedback within 24 hours
2Quote & Material PlanTransparent pricing with lead time commitment
3CNC Programming & SetupCAM-validated toolpaths and fixturing
4Precision MachiningIn-process checks on every operation
5Surface Finish & TreatmentAnodizing, plating, coating in-house
6Final Inspection & ShipFull dimensional report with every batch

Quality You Can Verify

CMM coordinate measuring machine for 3D precision inspection
01CMM 3D Precision MeasurementDedicated CMM lab verifies critical dimensions, hole positions and GD&T callouts per IATF 16949 practice; 3D scanning avoids assembly issues on complex parts.
Height gauge inspection equipment for in-process dimensional verification
02In-Process Dimensional VerificationContinuous on-line checks with precision gauges catch deviations early and minimize scrap risk during volume OEM runs.
Stereo microscope inspection for surface finish and visual quality checks
03Surface Finish & Visual InspectionSurface roughness, scratches, burrs and coating defects are checked against appearance standards before packing.
First article inspection report verification
04First-Article Inspection (FAI)Standardized FAI before every production run, with a formal report to guarantee dimensional consistency across the batch.
Raw material traceability management with mill certificates
05Material TraceabilityComplete material certifications and batch records — every machined part is traceable to its original mill, per IATF 16949.
Final functional performance checks before shipment
06Final Functional ChecksFull final inspection catches hidden defects dimensional tests can miss, so parts perform reliably in your assembly.
CMM VerificationCritical dimensions checked on coordinate measuring machine
In-Process ChecksContinuous on-line inspection during production runs
Surface Finish AuditRoughness, coating and visual standards verified
Full TraceabilityMaterial certs and batch records for every part

Inside Our Factory — 200+ Machines Under One Roof

Vertical machining center workshop — Rejin CNC factory

Vertical Machining Centers

High-efficiency VMCs for prototype, mid-volume and large-batch metal parts production.

Drill-machining center workshop — Rejin CNC factory

Drill & Tap Machining Centers

Integrated drilling, tapping and milling shortens lead time for aluminum enclosures.

Multi-function CNC machining workshop — Rejin CNC factory

Multi-Function Machining Shop

Combined drilling-milling lines support both small batches and volume OEM orders.

CNC production workshop with organized work areas

CNC Production Workshop

Well-organized production zones support everything from one-off parts to mass programs.

Standard CNC turning and milling production line

Standard CNC Lines

Systematic line layout raises machining efficiency and guarantees on-time delivery.

Full set of CNC milling equipment running continuously

5-Axis Machining Equipment

Complete CNC equipment set enables stable continuous running for OEM volumes.

Dongguan, China · 200+ CNC machines · In-house anodizing & laser cutting · Visitors and third-party inspections welcome.

Quality, Engineering & Logistics — Built for Global Buyers

IATF 16949 & ISO 9001 Certified

IATF 16949 & ISO 9001 Certified

Fully certified quality management system. Every batch ships with material certificates and inspection reports you can trust.

Free DFM Engineering Support

Free DFM Engineering Support

Our engineers review every drawing upfront — flagging tolerances, undercuts and cost drivers before a single chip is cut.

Secure Packaging & Global Shipping

Secure Packaging & Global Shipping

Custom foam, wooden crates and FBA-ready packaging. Door-to-door freight to 60+ countries with full tracking.

SIMPLE PROCESS

What Happens After You Click Send?

1
Inquiry Received

Your message lands directly with our senior engineers — instantly acknowledged.

2
Engineer Review

We study your requirements and propose a workable solution with material & process options.

3
Quote Within 24h

Detailed quotation with specs, options and lead time — no hidden fees.

4
Sample & Production

Approve the sample, then we mass-produce with full QC and on-time shipping.

WhatsApp: +86 13790500374

Email: info@rejincnc.com

WeChatRejin CNC WeChat QR code
WeChat ID: +86 18362358467

Scan this QR code with your WeChat app to add us as a contact — send drawings, get quotes within 24 hours and chat with our engineers directly.

Request a Quote

Custom Quote Within 24 Hours

    Upload Drawing / Sketch (Optional)

    No file selected

    Your CAD files are kept strictly confidential. Quotation within 24 hours.

    Send us an Email WhatsApp Instant Chat Get a Free Quote