CNC Stainless Steel Landing Gear Wheel Axles for RC UAV
- Straight, True Bearing Journals: CNC turned and ground bearing seats keep the wheel running concentric with no shimmy, so the tire wears evenly and the gear tracks straight on landing and rollout.
- Integrated Hex Flange: The machined hex flange registers against the gear leg and wheel pant, locating the axle precisely and resisting rotation under braking and side loads.
- Nylon-Insert Lock Nuts: Two nylon-insert lock nuts are included and stay tight under repeated landing vibration, eliminating the spun or loosened nuts that let a wheel walk off the axle.
- M10 / M12 & Hollow Options: Standard 6xM10x74 and 8xM12x87 mm solid or hollow axles; custom lengths, threads (metric or imperial) and materials from your drawing.
| Tolerance Type | Description |
| Precision Tolerance | Parts are manufactured and inspected strictly according to your drawing specifications and GD&T annotations, with a minimum tolerance of ±0.05 mm. |
| General Tolerance | ±0.05 mm |
| Minimum Feature Size | 0.5 mm. The exact minimum feature size may vary depending on the part geometry and selected material. |
| Threading & Tapped Holes | Capable of machining any standard thread sizes, as well as customized thread specifications. |
| Edge Condition | Sharp edges are deburred and chamfered by default. |
| Surface Finishing | Anodizing, Powder Coating, Spray Painting, Laser Engraving, Silk Screen Printing |
| Minimum Wall Thickness | 0.5mm |
| Minimum End Mill Size | 0.5mm |
| Minimum Drill Hole Size | 1mm |
| Minimum Part Size | CNC Milling: 5 × 5 × 5 mm; CNC Turning: 2 × 2 mm; |
| Maximum Part Size | CNC Milling: 4000 × 1500 × 600 mm
CNC Turning: 200 × 500 mm |
What Is This Product
What Is A Landing Gear Wheel Axle?
A wheel axle is the shaft that carries each landing gear wheel. It mounts to the gear leg (or wheel pant), locates the wheel bearings and hub, and is secured by a nut or lock nut. On a fixed-wing aircraft it must withstand the vertical impact of landing, side loads during crosswind touchdowns and the vibration of a long rollout.
Why Axles Fail
Bent axles cause wheel shimmy and nose-over; soft or un-hardened journals wear oval and destroy wheel bearings; plain nuts unwind from vibration so the wheel walks off mid-rollout. A precisely turned stainless axle with a ground bearing journal, a locating hex flange and nylon-insert lock nuts removes all three failure modes and survives thousands of landings.
How We Machine Them
Each axle is CNC turned from 304/316 stainless steel bar in one setup: the bearing journal, integrated hex flange, spacer shoulders and both threaded ends are machined true to one axis. Hollow variants are gun-drilled to reduce unsprung weight while retaining stiffness. Threads are cut or rolled to fit, the assembly is deburred and two matched nylon-insert lock nuts are supplied.
Precision Axle Machining
Ground, Zero-Shimmy Journals
The bearing journal is CNC turned and ground to +/-0.01 mm so the wheel runs perfectly concentric, eliminating shimmy, tire wear and bearing damage on landing and rollout.
Hex Flange That Cannot Rotate
The integrated machined hex flange registers against the gear leg and wheel pant, locating the axle and resisting rotation under braking and crosswind side loads.
Lock Nuts That Stay Tight
Two nylon-insert lock nuts are included and supplied to fit; they hold the wheel and gear leg under repeated landing vibration so the wheel cannot walk off.
Materials We Machine
From aerospace-grade aluminum to medical-certified engineering plastics, our in-house CNC machining centers work a broad range of metals and plastics under one roof.
Metals
Aluminum
Stainless Steel
Carbon & Alloy Steel
Brass & Copper
Titanium & Exotics
Engineering Plastics
POM (Delrin)
Nylon (PA66)
PTFE (Teflon)
PEEK / PEI (Ultem)
ABS / PC / PMMA
Don’t see your material? Send your drawing for review — we will confirm availability and quote it.
Surface Finish Options
Functional and cosmetic finishes applied in-house or through vetted partners.

Clear Anodize
Type II protective anodize, natural silver finish.

Black Hard Anodize
Type III hard coat, wear-resistant black.

Color Anodize
Blue, red, gold, green dye for audio and 3C.

Bead Blast
Uniform matte texture, hides machining marks.

Powder Coating
Durable corrosion-resistant RAL colors.

Passivation
Removes free iron, boosts stainless corrosion.

Plating
Zinc, nickel, chrome, tin for connectors.

Laser Marking
Permanent non-contact logos and serials.
From Drawing to Delivery
Quality You Can Verify


More Products in This Category
Custom CNC brass and steel fuel clunk pickups for RC aircraft fuel tanks - weighted barbed tails, bronze filters, 1-3 day samples.
View Product →
Custom CNC aluminum servo control horns for RC fixed-wing aircraft and UAVs - blue anodized L/R pairs, +/-0.01mm pivot, quick-release pin, 1-3 day prototypes.
View Product →
Inside Our Factory — 200+ Machines Under One Roof
Vertical Machining Centers
High-efficiency VMCs for prototype, mid-volume and large-batch metal parts production.
Drill & Tap Machining Centers
Integrated drilling, tapping and milling shortens lead time for aluminum enclosures.
Multi-Function Machining Shop
Combined drilling-milling lines support both small batches and volume OEM orders.
CNC Production Workshop
Well-organized production zones support everything from one-off parts to mass programs.
Standard CNC Lines
Systematic line layout raises machining efficiency and guarantees on-time delivery.
5-Axis Machining Equipment
Complete CNC equipment set enables stable continuous running for OEM volumes.
Dongguan, China · 200+ CNC machines · In-house anodizing & laser cutting · Visitors and third-party inspections welcome.
Quality, Engineering & Logistics — Built for Global Buyers

IATF 16949 & ISO 9001 Certified
Fully certified quality management system. Every batch ships with material certificates and inspection reports you can trust.

Free DFM Engineering Support
Our engineers review every drawing upfront — flagging tolerances, undercuts and cost drivers before a single chip is cut.

Secure Packaging & Global Shipping
Custom foam, wooden crates and FBA-ready packaging. Door-to-door freight to 60+ countries with full tracking.
Frequently Asked Questions
What sizes are available as standard?
Can you supply hollow axles to save weight?
Are the lock nuts included?
Which materials do you machine?
SIMPLE PROCESS
What Happens After You Click Send?
Your message lands directly with our senior engineers — instantly acknowledged.
We study your requirements and propose a workable solution with material & process options.
Detailed quotation with specs, options and lead time — no hidden fees.
Approve the sample, then we mass-produce with full QC and on-time shipping.
WhatsApp: +86 13790500374
Email: info@rejincnc.com

Scan this QR code with your WeChat app to add us as a contact — send drawings, get quotes within 24 hours and chat with our engineers directly.
Custom Quote Within 24 Hours
Your CAD files are kept strictly confidential. Quotation within 24 hours.
